دستگاه تست کشش هوپ (حلقه آشکار) لوله های پلاستیک یا لوله های پلاستیک تقویت شده طبق استاندارد ASTM D2290 – 19a

فراتست عرضه کننده دستگاه های تست

0912-3750274

021-88705040

دستگاه تست استحکام کششی هوپ (حلقه آشکار) لوله های پلاستیک یا لوله های پلاستیک تقویت شده طبق استاندارد ASTM D2290 – 19a

ASTM D2290 – 19a

Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

  • ASTM C1863 – 18 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
  • ASTM C1819 – 15 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts

This test method covers the determination of the comparative apparent tensile strength of most plastic products utilizing a split disk or ring segment test fixture, when tested under defined conditions of pretreatment, temperature, humidity, and test machine speed. This test method is applicable to reinforced-thermosetting resin pipe regardless of fabrication method. This test method also is applicable to extruded and molded thermoplastic pipe.

Procedure A is used for reinforced-thermosetting resin pipe; Procedure B is used for thermoplastic pipe of any size; Procedure C is used for thermoplastic pipe with nominal diameter of 4 12 in. (110 mm) and greater. Procedure D is used for polyethylene pipe with a nominal diameter of 14 in. (350 mm) and greater and preferably having wall thickness 1 in. (25 mm) and greater. Procedure E is used for polyvinyl chloride (PVC) pipe with a nominal diameter of 14 in. (350 mm) and greater and having wall thickness 0.5 in. (12.7 mm) and greater.

 

یک پاسخ ارسال نمایید