ISO 898 Bolts, Screws and Studs Test Machine

ISO 898 Bolts, Screws and Studs Tensile, Torsion, Compression Test Machine

ISO 898 is an international standard that defines mechanical and physical properties for metric fasteners. This standard is the origin for other standards that define properties for similar metric fasteners, such as SAE J1199 and ASTM F568M. It is divided into five (nonconsecutive) parts:

1. Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread. Nuts with specified proof load values – Coarse thread3

 Set screws and similar threaded fasteners not under tensile stresses

 Nuts with specified proof load values – Fine pitch thread

Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

With exception to part 7, which defines test standards, the parts of this standard define properties for fasteners made of carbon steel and alloy steel. The standards define that the testing must be performed at ambient temperatures, which is defined as between 10 and

Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread

Part 2: Nuts with specified proof load values – Coarse thread

Part 5: Set screws and similar threaded fasteners not under tensile stresses

Part 6: Nuts with specified proof load values – Fine pitch thread

Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

ASTM A193 which is alloy steel and bolting materials for high temperature or high pressure service.

ASTM A307 is for carbon steel bolts and studs, 60,000 psi tensile strength.

ASTM A320 is for alloy steel and stainless steel bolting for low temperature service.

 ASTM A325 is for structural bolts, heat treated, 120/105ksi min tensile strength and it is replaced by ASTM F3125.

ASTM A354 is for quenched and tempered alloy bolts. ASTM A449 is quenched and tempered steel bolts for general use.

ASTM A490 is for structural bolt, alloy steel, heat treated and has minimum tensile strength of 150 ksi but it is replaced by ASTM F3125.

ASTM F593 is for stainless steel bolts, studs and hex cap screws. ASTM F1554 is for anchor bolts which are designed to anchor structural supports to concrete foundations. 

ASTM Bolts and Nuts specification are ASTM A194 is for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service.

ASTM A563 is for Wrought Cobalt-20, Nickel-20, Chromium-3.5, Molybdenum-3.5, Tungsten-5, Iron. Alloy for Surgical Implant Applications.

ASTM A594 is for Stainless Steel Nuts , Corrosive service applications and ASTM F467 is for Nonferrous Nuts for General Use , general use

Faratest Co supplies testing machines

info@faratest.com

Tel: +98 21 88705040

Whatsapp & Telegram: +98 912 3750274

  • ASTM A193 Grade B6 Bolts
  • ASTM A193 Grade B6X Bolts
  • ASTM A193 Grade B7 Bolts
  • ASTM A193 Grade B7m Bolts
  • ASTM A193 Grade B8 Bolts
  • ASTM A193 Grade B8M Bolts
  • ASTM A193 Grade B8 Class 2 Bolts
  • ASTM A193 Grade B8C Bolts
  • ASTM A193 Grade B16 Bolts
  • ASTM A194 Grade 2H Nuts
  • ASTM A194 Grade 7 Nuts
  • ASTM A194 Grade 8 Nuts
  • ASTM A194 Grade 8m Nuts
  • ASTM A563 Grade C Nut
  • ASTM A453 Grade 660 Bolts
  • ASTM A320 L7 Stud Bolts
  • ASTM F593 Bolts
  • ASTM A563 Nut
  • ASTM F468 Bolts
  • ASTM F436 Washer
  • ASTM F467 Nuts
  • ASTM F594 Nuts
  • A325 Structural Bolts
  • ISO 4014 Hex Bolt
  • ISO 4017 Hex Head Screw
  • ISO 4032 Nut
  • ISO 4162 Flange Bolts
  • ISO 4161 Flange Nut
  • En 14399-4 Bolt
  • En 14399-6 Washer
  • EN 15048 Bolts

Bolts & Screws

ASME B18.15 Forged Eyebolts (Type 1 & Type 2)
ASME B18.2.1 Square Head Bolts
ASME B18.2.1 Hex Bolts and Heavy Hex Bolts
ASME B18.2.1 Askew Head Bolts
ASME B18.2.1 Hex Cap Screws
ASME B18.2.1 Hex Flange Screws
ASME B18.2.1 Lobed Head Screws
IFI 115 Flange 12-Point Screws
ASME B18.5 Round Head Bolts
ASME B18.5 Round Head Square Neck Bolts
ASME B18.5 Round Head Short Square Neck Bolts
ASME B18.5 Round Head Ribbed Neck Bolts
ASME B18.5 Round Head Fin Neck Bolts
ASME B18.5 Step Bolts
ASME B18.5 Countersunk Bolts and Slotted Countersunk Bolts
ASME B18.5 114-deg Countersunk Square Neck Bolts
ASME B18.5 Flat Countersunk Head Elevator Bolts
ASME B18.5 T-Head Bolts
ASME B18.9 No. 3 Head Plow Bolts Round, Countersunk, Square Neck
ASME B18.9 No. 7 Head Plow Bolts Round, Countersunk, Reverse Key
ASME B18.9 No. 4 Repair Head Plow Bolts(Square Head, Countersunk)
ASME B18.9 No .6 Repair Head Plow Bolts(Round, Countersunk, Heavy Key)
ASME B18.10 Oval Neck Track Bolts
ASME B18.10 Elliptic Neck Track Bolts
IFI 136 Double End Studs
IFI 136 Interference-Thread Double End Studs
IFI 136 Bent Studs
IFI 148 Type U3 Projection Weld Studs
IFI 148 Type T3 Projection Weld Studs
IFI 148 Type TD Projection Weld Studs
IFI 148 Type UR Projection Weld Studs
IFI 148 Heavy Duty Type US3 Projection Weld Studs
IFI 148 Type UC4 Projection Weld Studs
IFI 148 Type TC4 Projection Weld Studs
IFI 148 Type TUS3 Projection Weld Studs
ASME B18.6.2 SLOTTED FLAT COUNTERSUNK HEAD CAP SCREWS
ASME B18.6.2 SLOTTED ROUND HEAD CAP SCREWS
ASME B18.6.2 SLOTTED FILLISTER HEAD CAP SCREWS
ASME B18.2.1 Square Head Bolts
ASME B18.6.2 SLOTTED HEADLESS SET SCREWS
ASME B18.2.5M Metric 12-Point Flange Head Screws
ASME B18.6.3 Slotted Flat Countersunk Head Screws
ASME B18.6.3 Recess Flat Countersunk Head Screws
ASME B18.6.3 Slotted 100-deg Flat Countersunk Head Screws
ASME B18.6.3 Recess 100-deg Flat Countersunk Head Screws
ASME B18.6.3 Slotted Close Tolerance 100-deg Flat Countersunk Head Screws
ASME B18.6.3 Recess Close Tolerance 100-deg Flat Countersuk Head Screws
ASME B18.6.3 Slotted Oval Countersuk Head Screws
ASME B18.6.3 Recess Oval Countersuk Head Screws
ASME B18.6.3 Slotted Undercut 82-deg Flat Countersuk Head Screws
ASME B18.6.3 Recess Undercut 82-deg Flat Countersuk Head Screws
ASME B18.6.3 Slotted Undercut Oval Countersuk Head Screws
ASME B18.6.3 Undercut Oval 82-deg Countersunk Head Screws
ASME B18.6.3 Flat Countersunk Trim Head Screws
ASME B18.6.3 Recess Dimensions For Countersuk Trim Head Screws

Nuts

ASME B18.2.2 Square and Hex Machine Screw Nuts
ASME B18.2.2 Small Pattern Hex Machine Screw Nuts
ASME B18.2.2 Square Nuts
ASME B18.2.2 Hex Flat Nuts and Hex Flat Jam Nuts
ASME B18.2.2 Hex Nuts and Hex Jam Nuts
ASME B18.2.2 Hex Slotted Nuts
ASME B18.2.2 Hex Thick Nuts
ASME B18.2.2 Hex Thick Slotted Nuts
ASME B18.2.2 Heavy Square Nuts
ASME B18.2.2 Heavy Hex Flat Nuts and Heavy Hex Flat Jam Nuts
ASME B18.2.2 Heavy Hex Nuts and Heavy Hex Jam Nuts
ASME B18.2.2 Heavy Hex Slotted Nuts
ASME B18.2.2 Hex Flange Nuts and Large Hex Flange Nuts
ASME B18.2.2 Hex Coupling Nuts
IFI 145 Hex Flange Nuts
IFI 128 Hex Coupling Nuts
ASME B18.10 Track Bolt Nuts

Rivets

ASME B18.1.1 Flat Head Rivets
ASME B18.1.1 Flat Countersunk Head Rivets
ASME B18.1.1 Button Head Rivets
ASME B18.1.1 Pan Head Rivets
ASME B18.1.1 Truss Head Rivets
ASME B18.1.1 Tinners Rivets
ASME B18.1.1 Coopers Rivets
ASME B18.1.1 Belt Rivets
ASME B18.1.1 60-Degree Flat Countersunk Head Rivets
ASME B18.1.2 Button Head Rivets
ASME B18.1.2 Button Head Acorn Rivets
ASME B18.1.2 Cone Head Rivets
ASME B18.1.2 Flat Countersunk Head Rivets
ASME B18.1.2 Oval Countersunk Head Rivets
ASME B18.1.2 Pan Countersunk Head Rivets
ASME B18.1.2 Swell-Neck Rivets
ASME B18.1.2 Button Head Rivets Manufactured Heads After Driving and Driven Heads,Also Hold-On (Dolly Bar)and Rivet Set Impressions
ASME B18.1.2 High Button Head (Acorn) Rivets Manufactured Heads After Driving and Driven Heads,Also Hold-On (Dolly Bar)and Rivet Set Impressions
ASME B18.1.2 Cone Head Rivets Manufactured Heads After Driving and Driven Heads,Also Hold-On (Dolly Bar)and Rivet Set Impressions
ASME B18.1.2 Pan Head Rivets Manufactured Heads After Driving and Driven Heads,Also Hold-On (Dolly Bar)and Rivet Set Impressions
ASME B18.7 Oval Head Semi Tubular Riverts
ASME B18.7 Truss Head Semi Tubular Riverts
ASME B18.7 150-deg Flat Countersunk Head Semi Tubular Riverts
ASME B18.7 150-deg Large Flat Countersunk Head Semi-Tubular Rivets
ASME B18.7 120-deg Flat Countersunk Head Semi- Tubular Riverts
ASME B18.7 Full Tubular Rivets:Oval Head,Truss Head,Flat Countersunk Head
ASME B18.7 Oval Head Split Rivets
ASME B18.7 Flat Countersunk Head Split Rivets
ASME B18.7 Rivet Caps
IFI 114 Break Mandrel Blind Rivets
IFI 117 Regular and Large Dome Head Pull Through Mandrel Blind Rivets
IFI 117 100 Degree Countersunk Head Pull Through Mandrel Blind Rivets
IFI 119 Regualr and Large Dome Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFI 119 100 Degree and 120 Degree Countersunk Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

Faratest Co supplies testing machines

info@faratest.com

Tel: +98 21 88705040

Whatsapp & Telegram: +98 912 3750274

DIN Fastener Specifications

DIN-Cap nuts
DIN-Castle nuts
DIN-Clevis pins
DIN-Clevis pins
DIN-Knurled nuts
DIN-Shim rings
DIN-Slotted head screws
DIN-Square head bolts
DIN-Square nuts
DIN-Tapping screws
DIN-Thread forming screws
DIN-Washers for use in structural steelwork
DIN-Weld nuts
DIN-Weld screws
DIN-Wood screws
DIN-Cross recessed head screws
DIN-Double end studs
DIN-Pins
DIN-Nails
DIN-Hexagon head bolts and screws 
DIN-Hexagon head bolts and screws for use in DIN-Structural steelwork
DIN-Drilling screws with tapping screw thread
DIN-Split pins
DIN-Plain washers
DIN-Hexalobular head bolts
DIN-Prevailing torque type nuts
DIN-Sepcial washers
DIN-Miscellaneous bolts and screws
DIN-Miscellaneous nuts
DIN-Retaining rings
DIN-Keys

DIN 1-100
DIN 1 – Taper Pins 
DIN 7 – Dowel Pins 
DIN 84 A – Slotted Cheese Head Machine Screws 
DIN 85 A – Slotted Pan Head Machine Screws 
DIN 93 – Tab Washers With Long Tab 
DIN 94 – Cotter Pins 
DIN 95 – Slotted Oval Head Machine Screws 
DIN 96 – Slotted Round Head Wood Screws 
DIN 97 – Slotted Flat Head Wood Screws

DIN 101-200
DIN 125 A – Flat Washer Without Chamfer 
DIN 125 B – Flat Washer With Chamfer 
DIN 126 – Grade C Flat Washer Without Chamfer 
DIN 127 A – Split Lock Washer With Bend Ends 
DIN 127 B – Split Lock Washer With Flat Ends 
DIN 128 A – Split Spring Washers, Curved 
DIN 128 B – Split Spring Washers, Waved 
DIN 137 A – Spring Washer, Curved 
DIN 137 B – Spring Washer, Waved 
DIN 186 A – Tee-Head Bolts With Square Head 
DIN 188 – Tee-Head Bolts With Double Nip 
DIN 193 
DIN 196

DIN 301-400
DIN 315 – Wing Nuts 
DIN 316 – Wing Screws

DIN 401-500
DIN 404 – Slotted Drilled Fillister Head Screws 
DIN 417 – Slotted set screws with full dog point
DIN 427 – Slotted Headless Screws 
DIN 431 – Jam Nut, Hexagonal 
DIN 432 – External Tab Washer 
DIN 433 – Flat Washer With Reduced O.D. 
DIN 434 – Square Bevel Washer: 8% 
DIN 435 – Square Bevel Washer: 14% 
DIN 436 – Square Washer 
DIN 438 – Slotted set screws with cup point
DIN 439 A – Hexagon Nuts – 0,5d Unchamfered 
DIN 439 B – Hexagon Nuts – 0,5d Chamfered 
DIN 444 A – Eye Bolts 
DIN 462 – Internal Tab Washers 
DIN 463 – Tab Washers With Long And Short Tab 
DIN 464 – Knurled Thumb Screws 
DIN 466 – Knurled Nuts, Full 
DIN 467 – Flat Knurled Nuts 
DIN 470 – Sealing Washers 
DIN 471 – External Retaining Rings 
DIN 472 – Internal Retaining Rings 
DIN 478 – Square Head Bolts 
DIN 479 – Square Head Bolts 
DIN 480 – Square Head Bolts

DIN 501-600
DIN 525 – Weld Studs With Hexagon Nuts 
DIN 529 A – Anchor Bolts (Stone Bolt) 
DIN 529 B – Anchor Bolts (Stone Bolt) 
DIN 529 C – Masonry Bolts With Hexagon Nuts 
DIN 529 D – Anchor Bolts (Stone Bolt) 
DIN 529 E – Foundation Bolts With Hexagon Nuts 
DIN 529 F – Anchor Bolts (Stone Bolt)
DIN 529 G Bolt
Din 546 – Slotted Round Nut
DIN 547 – Round nuts with drilled holes in one face
DIN 548 – Round nuts with set pin holes in side
DIN 551 – Slotted Set Screws With Flat Point 
DIN 553 – Slotted Set Screws With Cone Point 
DIN 555 – Hexagon Nuts – 0,8d 
DIN 557 – Square Nuts 
DIN 558 – Fully Threaded Maching Bolts 
DIN 562 – Square Thin Nuts 
DIN 571 – Hexagon Lag Screws 
DIN 580 – Lifting Eye Bolts 
DIN 582 – Lifting Eye Nuts

DIN 601-700
DIN 601- Hexagon head bolt with nut
DIN 603 Mu – Carriage Bolts With Hexagon Nuts 
DIN 604 – Flat Countersunk Nip Bolts With Hex Nuts 
DIN 605 – Flat Countersunk Square Neck Bolts 
DIN 607 – Round Head Nip Bolts With Nuts 
DIN 608 – Countersunk Square Bolts (Short Neck) 
DIN 609 – Hex Fitting Bolts w/long Threaded Portion 
DIN 610 – Hex fitting Bolts w/short Threaded Portion 
DIN 653 – Flat Knurled Thumb Screws 
DIN 660 – Round Head Rivets 
DIN 661 – Countersunk Head Rivets

DIN 701-800
DIN 705 A – Shaft Collars

DIN 801-900
DIN 835 Fo – Studs, Tap Ends – 2d

DIN901-1000
DIN 906 – Hexagon Socket Pipe Plugs 
DIN 908 – Hexagon Socket Screw Plugs 
DIN 910 – Hexagon Head Screw Plugs 
DIN 911 – Hexagon Socket Screw Keys 
DIN 912 – Socket Head Cap Screws 
DIN 913 – Socket Set Screws With Flat Point 
DIN 914 – Socket Set Screws With Cone Point 
DIN 915 – Socket Set Screws With Dog Point 
DIN 916 – Socket Set Screws With Cup Point 
DIN 917 – Hexagon Cup Nuts – Low Pattern 
DIN 920 – Slotted Pan Head Screws, Small Head 
DIN 921 – Slotted pan head screws with large head
DIN 923 – Slotted Pan Head Screws With Shoulder 
DIN 927 – Slotted Shoulder Screws 
DIN 928 – Square Weld Nuts 
DIN 929 – Hexagon Weld Nuts 
DIN 931 – Hexagon Cap Screws Partially Threaded 
DIN 933 – Hexagon Cap Screws Fully Threaded 
DIN 933 Sz – Hexagon Cap Screws With Slot 
DIN 934 – Hexagon Nuts – 0,8d 
DIN 935 – Castle Nuts 
DIN 936 – Hexagon Jam Nuts 
DIN 937 – Hexagon Thin Slotted And Castle Nuts 
DIN 938 – Studs – Metal end ≈ 1 d.htm
DIN 939 – Studs, Tap End – 1,25d 
DIN 960 – Hex Cap Screws, Metric Fine Thread – Part Thread 
DIN 961 – Hex Cap Screws, Metric Fine Thread – Full Thread 
DIN 963 A- Slotted Flat Head Machine Screws 
DIN 964 A- Slotted Oval Head Machine Screws 
DIN 965 A – Cross Recessed Flat Head Machine Screws 
DIN 966 A – Cross Recessed Oval Head Machine Screws 
DIN 980 V – Self-Locking Nuts; All Metal Conctruction 
DIN 982 – Self- Locking Nuts w/nylon Insert: Heavy Series 
DIN 985 – Self Locking Nuts w/locking Insert: Standard Series 
DIN 986 – Self Locking Domed Cap Nuts With Nylon Insert 
DIN 988 – Shim Washers 

DIN 1001-2000
DIN 1052 
DIN 1440 – Flat Washers With Clevis Pins, Medium 
DIN 1441 – Flat Washers For Clevis Pins, Coarse 
DIN 1473 – Grooved Pins Full Length Paralled Grooved 
DIN 1475 – Grooved Pins Third Length Center Grooved 
DIN 1476 – Round Head Grooved Pins 
DIN 1477 – Flat Countersunk Head Grooved Pins 
DIN 1480 – Turnbuckles 
DIN 1481 – Spring Ppins, Heavy Duty 
DIN 1587 – Hexagon Domed Cap Nuts, Full Pattern 
DIN 1804 w – Slotted Round Nuts

DIN 2001-3000
DIN 2093 A,B,C – Dics Springs (Belleville Type) 
DIN 2338 – Parallel Pin
DIN 2339
DIN 2509 – Double end studs
DIN 2510

DIN 3001-3999
DIN 3570 – U Bows U Bolts

DIN 6001-7000
DIN 6319 – C D G Spherical washers and conical seats
DIN 6325 – Parallel Pins Hardened 
DIN 6332 – Grub screws with thrust point
DIN 6334 – Hexagon Nuts – 3d 
DIN 6796 – Conical Spring Washers (Belleville Type) 
DIN 6797 A+J – Internal/External Tooth Lock Washers 
DIN 6797 AZ – Tooth Lock Washers (Type AZ) 
DIN 6797 IZ – Tooth Lock Washers (Type JZ) 
DIN 6797 AZV – Tooth Lock Washers (Type AZV) 
DIN 6798 A+J – Serrated Lock Washers 
DIN 6798 AZV – Serrated Lock Washers (type AZV) 
DIN 6798 V – 90degree Countersunk Serrated Lock Washers 
DIN 6799 – Circlips For Shafts 
DIN 6885 A – Parallel Keys, Round Ended 
DIN 6885 B – Parallel Keys, Square Ended 
DIN 6911 – Hexagon Socket Screw Keys With Pilot 
DIN 6912 – Low Head Socket Cap Screws With Pilot 
DIN 6914 – Hex Bolts For High Strength Struct. Bolting 
DIN 6915 – Hex Nuts For High Strength Struc. Bolting 
DIN 6916 – Washers For High Strength Structural Bolting 
DIN 6917 – Square taper washer for -sections 14%
DIN 6918 – Square taper washer for U-sections
DIN 6921 – Hex Flange Bolts
DIN EN 1665 Hexagon bolts with flange – heavy series(Replace DIN 6922)
DIN 6923 – Hexagonal Flange Nuts 
DIN 6924 Prevailing torque type hexagon nut with nylon insert ISO 7040
DIN 6925 – Prevailing torque type hexagon nut all metal
DIN 6926 – Self-Locking Hex Flange Nuts: Non Metallic Insert
DIN EN 1663 – Prevailing torque type hexagon nuts with flange with non-metallic insert

DIN 7001-8000
DIN 7338 – Rivets for brake linings and clutch linings
DIN 7343 – Coiled Pins, Medium Duty 
DIN 7349 – Flat Washers With Large Ext. Diameter 
DIN 7504 – N P K head self drilling screws
DIN 7968 – Hexagon fit bolts with hexagon nut for steel structures
DIN 7969 – Slotted countersunk head bolts with hexagon nut for steel structures
DIN 7970 – Tapping screw threads
DIN 7978 A – Taper PIns With Internal Thread 
DIN 7979 D – Dowel Pins With Internal Thread 
DIN 7980 – Hi-Collar Lock Washers 
DIN 7981 B(BZ) – Cross Recessed Pan Head Tapping Screws 
DIN 7982 B – Cross Rec. Flat hd Tapping Screws, hd Angle 80 
DIN 7983 B – Cross Rec. Oval hd Tapping Screw, hd Angle 80 
DIN 7984 – Socket Low Head Cap Screws 
DIN 7985 A – Cross Recessed Pan Head Machine Screws 
DIN 7985 Z1 – Cr. Rec. Pan Head Screws w/captive Flt. Washer 
DIN 7985 Z4 – Cr. Rec. Pan Head Screws w/captive l/washer 
DIN 7989 A – Washers For Steel Constructions 
DIN 7991 – Flat Socket Head Cap Screws
DIN 7997 – Cross recessed countersunk head wood screws
DIN 7998 – Threads and Thread Ends for Wood Screws

DIN 9001-9999
DIN 9021
DIN 9250 Safety lock serrate washer 

DIN EN 22339 – Unhardened Taper Pins (Replace DIN 1) 

Leave a Reply