ISO 2232 Steel Wire Rope Tensile Testing Machine

  1. Home
  2. ISO 2232 Steel Wire Rope Tensile Testing Machine

ISO 2232 Steel Wire Rope Tensile Testing Machine

ISO 2232:1990(en)
Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications

Scope

This International Standard specifies round non-alloy steel drawn wires to be used in the manufacture of
  • — general purpose steel wire ropes as defined in ISO 2408;
  • — large diameter steel wire ropes as defined in ISO 8369.
It specifies
  • — the dimensional tolerances;
  • — the mechanical characteristics;
  • — the conditions with which the coating, if any, shall comply;
  • — the conditions of sampling, control and the terms of acceptance.
It applies to round bright or galvanized (quality A or B) wires of nominal diameters between 0,2 mm and 6 mm.
It does not apply to steel wire taken from manufactured ropes.
It does not apply to wire for ropes for special applications, such as
  • — winding ropes for mining purposes;
  • — ropes for aircraft controls;
  • — ropes for deep drilling equipment;
  • — ropes for aerial ropeways;
  • — ropes for elevators;
  • — ropes for prestressed concrete.

  •  Normative references

    The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
    • ISO 2408:1985, Steel wire ropes for general purposes — Characteristics.
    • ISO 6892:1984, Metallic materials — Tensile testing.
    • ISO 7800:1984, Metallic materials — Wire — Simple torsion test.
    • ISO 7801:1984, Metallic materials — Wire — Reverse bend test.
    • ISO 7802:1983, Metallic materials — Wire — Wrapping test.
    • ISO 8369:1986, Large diameter steel wire ropes.

  • Faratest Co supplies testing machines

    info@faratest.com

    Tel: +98 21 88705040

    Whatsapp & Telegram: +98 912 1508626

Leave a Reply