دستگاه تعیین سفتی خمشی (شقی) کاغذ و مقوا طبق استاندارد ISO 5628

کاغذ  و مقوا- تعیین سفتی خمش- اصول کلی برای آزمون به روش های دو نقطه ای، سه نقطه ای و چهار نقطه ای طبق استاندارد ملی 1118

تجدید نظر دوم سال 1392

ISO 5628:2012

Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods

ISO 5628:2012 specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods.

For paper and paperboard in a low thickness range, the two-point bending method and the three-point bending method are suitable.

For corrugated fibreboard and board with a higher thickness, the four-point bending method is recommended.

The measurement conditions are defined in such a way that the test piece is not subjected to any significant permanent deformation during the test, nor is the range of validity of the equations for calculating the bending stiffness exceeded.

In these bending tests, the test pieces of paper and board are regarded as “beams” as defined by the science of the strength of materials.

فراتست عرضه کننده دستگاه های تست

0912-1508626

021-88705040